electrical repair

Home Rewiring: All You Need To know

Old structures that were constructed at least five decades ago often need updates to their electrical systems. Blenders, computers, electric stoves, refrigerators and TVs all probably never existed when such historic homes were first wired. Simply put, modern appliances are known to consume lots of energy that the older homes may not be able to sustain. As such, the prospect of upgrading the electrical systems of older houses is an essential task.

When home rewiring is not carried out by a highly qualified electrician, there are higher chances that potentially dangerous electrical damages can occur. A significant number of historic homes have what we call knob and tube wiring. This type of installation does not have a third electrical cable for grounding, and as a result, it is considered to be unsafe in outdoors, bathrooms, kitchens as well as your laundry room. Nearly every house wired with tube and knob wiring does not have the ideal circuit capacity which can meet the energy demand of today’s appliances. The modern electronics, as well as other electric devices, require ground wiring. But, tube and knob type of wiring is just not suitable for them and could result in damages to them or could even lead to loss of life in extreme cases.

electrical repair

How can you know the type of electrical wiring in your home?

Apparently, the best way to determine the type of wiring in your house is to call an experienced electrician for a safety inspection process. It is recommended that you should carry out an electrical inspection after every ten years. You can also find out the kind of wiring you have by perhaps comparing any exposed cables to the pictures of knob and tube. However, if you are unsure about it, you’ll have to seek the help of technician for assistance.

What is the cost of conducting home rewiring project?

The total cost of home rewiring will depend on your existing electrical wiring as well as the square footage of your structure. Besides, the condition of your existing wiring and perhaps the number of outlets required will probably play a significant role in the total estimate. Finally, it will also depend on that particular technician who you’ll hire.

What are the steps of rewiring a home?

This is often a difficult task to accomplish, and this implies that you’ll need to plan appropriately before you begin working on anything. In this section, we want to discuss how to go about it safely and conveniently briefly.

Check out your local codes as well as pull permits: The set code standards for everything from what type of the electric cables you’ll be using to the number of outlets which will be put, must be observed. If you were not aware, your failure to get these permits would lead to having to pull out an already finished job.

Find an electrical technician who has adequate knowledge about older houses: Typically, working in historic buildings is not just demanding, but equally a complex and a difficult task. The complexity of the job implies that only an individual who understands it is allowed to work on such older homes.

Know that demolition and reconstruction will be an integral part of the process: Dealing with the damages which will occur after rewiring should be at the top of your list. Simply put, make the process of restoration and cleanup as essential just as the wiring itself.

For critical areas and electric devices, aim for what is known as home runs: Home runs are when a cable runs directly from circuit breakers to the outlet, with no other appliances being on that particular breaker. This feature can potentially reduce loads on your electrical system. Besides, you must ensure that you keep track of those areas that feed a particular switch in cases where more than one outlet is involved. This will help you to create a balanced electrical system, making it easier for you to put new wiring into use even as your load expands.

The demands of the modern electric devices have made home rewiring a critical project. Historic structures were designed at a time when sixty amps was somehow considered plenty of power for a single residence. Today, this is regarded to be a small amount of electricity. It is only through rewiring that you can potentially enhance both the efficiency and the power capacity of your home.